Altronix 8-PTC Output 12/24 VDC 6 Amp Power Supply/Access Power Controller
- Access Power Controller with PowerSupply
- Input 115VAC 60Hz rated @ 3.5 amp. Power supply input options: a) One (1) common power input for ACM8CB and lock power (factory installed). b) Two (2) solated power inputs – One (1) to power the ACM8CB and one (1) for lock accessory power, (external power supply is required). (Current is determined by the ower supply connected, not to exceed a maximum of 10 amp total). Eight (8) Access Control System trigger inputs. Input options: a) Eight (8) normally open (NO) inputs. b) Eight (8) open collector inputs. c) Any combination of the above.
- Output: 12VDC or 24VDC @ 6 amp supply current. Class 2 Rated power limited outputs. Eight (8) independently controlled outputs .Output options: a) Eight (8) Fail-Safe and/or Fail-Secure power outputs. b) Eight (8) form C 5 amp rated relay outputs c) Any combination of the above. Eight (8) auxiliary power outputs (unswitched) Output ratings: – PTCs are rated @ 2.5 amp. Filtered and electronically regulated outputs (built-in power supply).
- Visual Indicators: Red LEDs indicate outputs are triggered (relays energized). Green LED indicates FACP disconnect is triggered. AC input and DC output LED indicators.
- Battery Backup: Built-in charger for sealed lead acid or gel type batteries. AL600ULXB (Power Supply Board) maximum charge current 0.7 amp. Automatic switch over to stand-by battery when AC fails. Zero voltage drop when unit switches over to battery backup (AC failure condition). Battery fail and battery presence supervision (form C contact).
- Electrical: Operating temperature: 0° C to 49°: C ambient. ACM8CB board main fuse is rated at 10 amp. BTU/Hr.: – 12VDC: 36.85BTU/Hr. – 24VDC: 73.70BTU/Hr.
- Mfg #AL600ULACMCB
