Altronix 8-Fused Outputs 12/24 VDC 6 Amp Power Supply/Access Power Controller
- Access Power Controller with PowerSupply
- Input: Input 115VAC 60Hz rated @ 3.5 amp. Power supply input options: a) One (1) common power input for ACM8/ACM8CB and lock power (factory installed). b) Two (2) isolated power inputs – One (1) to power the ACM8/ACM8CB and one (1) for lock accessory power, (external power supply is required). (Current is determined by the power supply connected, not to exceed a maximum of 10 amp total). Eight (8) Access Control System trigger inputs. Input options: a) Eight (8) normally open (NO) inputs. b) Eight (8) open collector inputs. c) Any combination of the above.
- Output: 12VDC or 24VDC @ 6 amp supply current. Eight (8) independently controlled outputs. Output options: a) Eight (8) Fail-Safe and/or Fail-Secure power outputs. b) Eight (8) form C 5 amp rated relay outputs c) Any combination of the above. Eight (8) auxiliary power outputs (unswitched) Output ratings: – Fuses are rated @ 3.5 amp. Filtered and electronically regulated outputs (built-in power supply).
- Features: Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs. Fire Alarm disconnect input options: a) Normally open (NO) or normally closed (NC) dry contact input. b) Polarity reversal input from FACP signaling circuit. Alarm output relay indicates that FACP input is triggered (form C contact rated @ 1 amp 28VDC). Short circuit and thermal overload protection. AC fail supervision (form C contact).
- Visual Indicators: Red LEDs indicate outputs are triggered (relays energized). Green LED indicates FACP disconnect is triggered. AC input and DC output LED indicators.
- Battery Backup: Built-in charger for sealed lead acid or gel type batteries. AL600ULB (Power Supply Board) maximum charge current 0.7 amp. Automatic switch over to stand-by battery when AC fails. Zero voltage drop when unitswitches over to battery backup (AC failure condition). Battery fail and
